Tire Sidewall Ring Cutter Tire Recycling Machine

• Customization: Available
• After-sales Service: 24 Hours Technical Support by Email, Call, Video
• Warranty: 1 Year
• Model NO.: GLQQ-1
• Certification: CE
• Voltage: 380V
• Structure: Vertical
• Transport Package: Plywood Case
• Specification: 1150*850*1200MM
• Trademark: GL
• Origin: China
• HS Code: 84778000

Product Description

Tire Sidewall Ring Cutter Tire Recycling Machine

Waste tire processing equipment
Due to its small size, light weight and low cost, the waste tire decomposition and treatment equipment is specially used for the decomposition of waste tires. Cutting circles, strips and dicing can solve the problem of waste of waste tire transportation costs without affecting the next processing. . It is an ideal waste tire treatment equipment for the primary treatment of waste tires.
 

Product Description

1. Tire Ring cutter
The tire ring cutting machine is used to cut off the sidewall of the steel wire tire for the next step of division. Place the tire on the disk platform, rotate the middle hand wheel, the three-jaw clamp will firmly clamp the inner ring of the tire, start the power supply, the working platform will rotate, the cutting tool will feed into the tire as needed, and slowly cut into the tire, step by step, until the side of the tire is cut off.

Power	Processing range	Processing capacity	Dimension	Weight
2.2KW	750-1200mm tyre	25-30 tyres/h	1150*850*1200mm	0.5ton

2. Tyre Strips cutter
The strip cutting machine can cut the steel tire from the sidewall of the ring cutting machine into strips, and the width of the strips can be adjusted. The two disc knives are made of special materials, which are hard and durable, and can be used for repeated grinding. They are suitable for steel wire tires not exceeding 1200.

Power	Capacity	Diameter range	Outlet size	Dimension	Weight
4KW	20 Tyres/h	<1200	35-55mm	1230*650*1580	0.8ton

3. Tyre block cutting machine
The cutting machine can cut the tire strips cut by the cutting machine into blocks. The cutter is an alloy cutter with a daily output of nearly 9-11 tons. The cutter is not sharp and can be re-ground.

Power	Capacity	Outlet particle size	Dimension	Weight
7.5KW	0.8-1/	35*35*35	780*550*1210	0.6

Ring wire separator
4. The steel wire in the bead of the waste tire has good elasticity and high hardness, which is an ideal material for sand blasting and shot blasting; because the steel wire and rubber of the tire bead are not easily separated, the previous separation method is mainly burning, and this original treatment method is slow. , resulting in annealing of the steel wire, losing the advantages of good elasticity and high hardness, sharply decreasing the utilization value, and causing environmental pollution. After the rubber is burned, it becomes pure waste and cannot be reused.
The ring mouth wire separator separates the steel wire in the ring mouth through the extrusion of double grooved rollers and the difference in the speed ratio of the two grooved rollers, which well maintains the physical properties of the steel wire, and the rubber can be reused and avoid environmental pollution. Special equipment for processing waste tire rims.
 

Power	Capacity	Outlet size	Dimension	Weight
15KW	1 tyre per min.	1.2*500*20	1500*1100*1200	1ton

 

Detailed Photos